Victron Energy SCC900650010 SmartSolar Pluggable Display
$32.30
The SmartSolar Control Display is a pluggable LCD display for the SmartSolar Charge Controllers. Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.
Description
The SmartSolar Control display is a dedicated display for the following Victron MPPT solar charger ranges:
- SmartSolar MPPT 150/45 up to 250/100
- SmartSolar MPPT 150/70 up to 250/100 VE.Can
- BlueSolar MPPT 150/70 up to 250/100 VE.Can
These solar chargers can also be recognised by a small plastic cover on the front face with the text “display option”.
The display plugs directly into the front face of the solar charger. It can act as both a permanent or a temporary display. Simply remove the plastic cover that protects the display terminal on the front of the controller and then plug in the display.
The display can be used to monitor the solar charger and to view both live and historic data. The display can also be used to configure solar charger settings.
Examples of live and historic monitoring:
- PV power, yield, voltage and current.
- Battery voltage, current and charge stage.
- Load output state and current (only available if the solar charger is equipped with a load output).
- 30-day historical values.
- Cumulative historic values over the live of the solar charger.
Specifications
| Specification Heading | Specification Detail |
| Installation Type | Inserts into the display port on the front of a solar charger |
| Compatibility | Compatible with Victron Energy 150V and 250V BlueSolar and SmartSolar MPPT solar charger range that are equipped with a display port. |
| Display Port Connector | RS232 9 Pin |
| Dimensions (W x H x D) | 4.57 x 1.97 x 0.98 in |
| Weight | 0.15lbs |